Double Cone Blender

Product Details:

Double Deck Vibro Sifter

Separators Are Circular Unitary Gyratory Screens Used To Separate Mass Composition Of Solids From Solids, Liquid From Solid And For Gradation Of Materials As Per Particle Size, Having A Very Wide Range Applications.

This Is Accomplished By Vibrating The Screens In Three Different Planes Along The Vertical Axis By Means Of A Specially Designed Vibratory Motor Having Off Centred Weights At The Top And Bottom End Of The Motor Shaft.

Salient Features :

Noiseless, Maintenance Free & High Speeds

Available In Various Models Providing Screening Diameter Of 12”, 20”, 30” , 36”, 48”, 72” Etc

Portable And Compact

Electric Power Requirement Less Than Other Machine Of The Kind In The Industries & Lower Energy Consumption Compared To Reciprocating Vibratory System

Standard Machine Are With Motor Explosion Proof / Flame Proof Motor Material.

All Contact Parts And Screen Of Ss 304 Aisi Stainless Steel Material.

Ss 316 Quality Contact Parts Optional.

Additional Information:

• Production Capacity: As Per Requirement
• Delivery Time: As Per Requirement
• Packaging Details: As Per Requirement

Product Details:

Horizontal Blender Machine

Blender Machine The Powder Moves From Centre To The End Of Container And End Of Container To The Centre Of Container. Hence Requirement Of Total Mixing Time Is Very Less And The Rpm Required Are Also Very Less.

The Dry Material Gets Sufficient Continuous Movement Due To The Shape & Movement Of Ribbon & Shape Of The Container. Which Moves Material For Good Quality Of Blending.

The Unit Is Consist Of One Electrical Motor, One Worm Reduction Gear, Belt Drive Between Motor And Gear, Couple Drive Between Gear To ( Ribbon ) Mixing Stirrer. Container Having Four Nos. Of Legs With Discharge Valve & Top Cover. Both End Of Mixing Shaft Is Sealed With Bush & Gland Housing & Safety Guards Are Provided On All Moving Parts.

Special Features Of The Ribbon Blender :

The Shape Of Container And Mixing Stirrer Gives Sufficient Continuous Movement To The Powder / Granules, Result In Good Quality.

All Contact Parts Of The Ribbon Blender Are Made Of SS 304/SS 316 Or SS 316 L Quality Material.

Jacket Heating / Cooling Facility Provided As Optional.

Maximum Care Has Been Taken To Ensure Safe Operation Of The Unit.

Inching Facility For Stirrer For Discharge Of Material.

Full Cover On Top Side Of The Container.

Discharge Height Must Be Adjusted, If Confirm With Order.

Operating Panel Provided For Safe Operation Of Ribbon Blender.

Centrally Located Material Discharge Valve. ( Butter Fly / Sliding Valve )

Dust Proof Top Cover With Window Provided.

General Structure Completely Made Out Of Mild Steel & Painted In Standard Model & The Same Is Claded With SS 304 In Gmp Model.

Safety Guards & Covers Made Out Of SS 304 In Gmp Model & Made Out Of Mild Steel In Standard Model.

Additional Information:

• Production Capacity: As Per Requirement
• Delivery Time: As Per Requirement
• Packaging Details: As Per Requirement

Product Details:

Mixing Powder Double Cone Blender

Is An Efficient And Versatile Machine For Mixing Dry Powder And Granules Homogeneously. All The Contact Parts Made Out Of Stainless Steel Of Required Grade By Customer. Two Third Of The Volume Of The Cone Blender Is Filled To Ensure Proper Mixing. 

Salient Features

Detachable “Double Cone” Chamber Design To Sterilize The ‘Double Cone” Chamber In Autoclave.

Suitable For Inject Able Dry Powder Mixing.

Easy For Loading And Unloading.

Easy For Cleaning.

All Contact Parts Are Made Of Stainless Steel 316 L Material.

Two Nos. Of Safety Road Will Be Provided At Back Side For Safety Operation.    ( One Lh Side & One Rh Side )

Suitable Size Of Butter Fly Valve At One End Of The Cone Provided For Material Discharge & Hole With Openable Cover Provided At Other End Of The Cone For Material Charging & Cleaning.

One Shaft With 04 Nos. Of Fixed Buffels With Mirror Polished Provided Inside The Cone.

Cone Will Be Mirror Polished From The Inside & Outside & Structure Will Be Matt Polished.

All Moving Parts Covered With Ss304 Covers.

Safety Guards Made From Ss304 Pipes Provided In Front Of The M/C With Limit Switch.

Panel Fabricated From Ss304 Material With Facility Of Three Phase Indication, D.O.L. Tarter, Digital Timer & Amp. Meter.

As Per Customer Requirement Machine Will Be Provided With Left Side Drive Or With Right Side Drive.

The Conical Shape At Both Ends Enables Uniform Mixing And Easy Discharge.

Additional Information:

• Item Code: 8778
• Production Capacity: As Per Requirement
• Delivery Time: As Per Requirement
• Packaging Details: As Per Requirement

Product Details:

Horizontal Blender Machine

Blender Machine The Powder Moves From Centre To The End Of Container And End Of Container To The Centre Of Container. Hence Requirement Of Total Mixing Time Is Very Less And The Rpm Required Are Also Very Less.

The Dry Material Gets Sufficient Continuous Movement Due To The Shape & Movement Of Ribbon & Shape Of The Container. Which Moves Material For Good Quality Of Blending.

The Unit Is Consist Of One Electrical Motor, One Worm Reduction Gear, Belt Drive Between Motor And Gear, Couple Drive Between Gear To ( Ribbon ) Mixing Stirrer. Container Having Four Nos. Of Legs With Discharge Valve & Top Cover. Both End Of Mixing Shaft Is Sealed With Bush & Gland Housing & Safety Guards Are Provided On All Moving Parts.

Special Features Of The Ribbon Blender :

The Shape Of Container And Mixing Stirrer Gives Sufficient Continuous Movement To The Powder / Granules, Result In Good Quality.

All Contact Parts Of The Ribbon Blender Are Made Of SS 304/SS 316 Or SS 316 L Quality Material.

Jacket Heating / Cooling Facility Provided As Optional.

Maximum Care Has Been Taken To Ensure Safe Operation Of The Unit.

Inching Facility For Stirrer For Discharge Of Material.

Full Cover On Top Side Of The Container.

Discharge Height Must Be Adjusted, If Confirm With Order.

Additional Information:

• Production Capacity: As Per Requirement
• Delivery Time: As Per Requirement
• Packaging Details: As Per Requirement

Product Details:

Double Cone Blender

Is An Efficient And Versatile Machine For Mixing Dry Powder And Granules Homogeneously. All The Contact Parts Made Out Of Stainless Steel Of Required Grade By Customer. Two Third Of The Volume Of The Cone Blender Is Filled To Ensure Proper Mixing. 

Salient Features

Detachable “Double Cone” Chamber Design To Sterilize The ‘Double Cone” Chamber In Autoclave.

Suitable For Inject Able Dry Powder Mixing.

Easy For Loading And Unloading.

Easy For Cleaning.

All Contact Parts Are Made Of Stainless Steel 316 L Material.

Two Nos. Of Safety Road Will Be Provided At Back Side For Safety Operation.    ( One Lh Side & One Rh Side )

Suitable Size Of Butter Fly Valve At One End Of The Cone Provided For Material Discharge & Hole With Openable Cover Provided At Other End Of The Cone For Material Charging & Cleaning.

One Shaft With 04 Nos. Of Fixed Buffels With Mirror Polished Provided Inside The Cone.

Cone Will Be Mirror Polished From The Inside & Outside & Structure Will Be Matt Polished.

All Moving Parts Covered With Ss304 Covers.

Safety Guards Made From Ss304 Pipes Provided In Front Of The M/C With Limit Switch.

Panel Fabricated From Ss304 Material With Facility Of Three Phase Indication, D.O.L. Tarter, Digital Timer & Amp. Meter.

As Per Customer Requirement Machine Will Be Provided With Left Side Drive Or With Right Side Drive.

The Conical Shape At Both Ends Enables Uniform Mixing And Easy Discharge.

Maximum Care Has Been Taken To Ensure Safe Operation Of The Unit.

Worm Reduction Gear Use For Speed Reduction.

Food Grade Rubber Gasket Will Be Used On Both End Of Cone As Well As In Butterfly Valve.

Inside & Outside Of The Cone Will Be Polished To The Mirror Finished.

General Structure Made Out Of Ss304 And Polished To The Matt / Mirror Finish ( As Required By You ) In Gmp Model.

All Safety Guards & Covers Made Out Of Ss304 In Gmp Model. Hand Wheel Will Be Provided For Manual Tilting Of Cone.

Safety Guards Provided With Limit Switch To Not Start The Machine When Safety Guards Are Not In Proper Position.

Additional Information:

• Item Code: 120