Product Details:
Minimum Order Quantity | 1 Piece |
Capacity | 200 per hr |
Usage/Application | Industrial |
Material | SS |
Design Type | Standard |
Automation Grade | Automatic |
Country of Origin | Made in India |
Ribbon Blender Mixing Machine
Blender Machine The Powder Moves From Centre To The End Of Container And End Of Container To The Centre Of Container. Hence Requirement Of Total Mixing Time Is Very Less And The Rpm Required Are Also Very Less.
The Dry Material Gets Sufficient Continuous Movement Due To The Shape & Movement Of Ribbon & Shape Of The Container. Which Moves Material For Good Quality Of Blending.
The Unit Is Consist Of One Electrical Motor, One Worm Reduction Gear, Belt Drive Between Motor And Gear, Couple Drive Between Gear To ( Ribbon ) Mixing Stirrer. Container Having Four Nos. Of Legs With Discharge Valve & Top Cover. Both End Of Mixing Shaft Is Sealed With Bush & Gland Housing & Safety Guards Are Provided On All Moving Parts.
Special Features Of The Ribbon Blender :
The Shape Of Container And Mixing Stirrer Gives Sufficient Continuous Movement To The Powder / Granules, Result In Good Quality.
All Contact Parts Of The Ribbon Blender Are Made Of SS 304/SS 316 Or SS 316 L Quality Material.
Jacket Heating / Cooling Facility Provided As Optional.
Maximum Care Has Been Taken To Ensure Safe Operation Of The Unit.
Inching Facility For Stirrer For Discharge Of Material.
Full Cover On Top Side Of The Container.
Discharge Height Must Be Adjusted, If Confirm With Order.
Operating Panel Provided For Safe Operation Of Ribbon Blender.
Centrally Located Material Discharge Valve. ( Butter Fly / Sliding Valve )
Dust Proof Top Cover With Window Provided.
General Structure Completely Made Out Of Mild Steel & Painted In Standard Model & The Same Is Claded With SS 304 In Gmp Model.
Safety Guards & Covers Made Out Of SS 304 In Gmp Model & Made Out Of Mild Steel In Standard Model.
Legs Made Out Of M.S & Painted In Standard Model & Same Will Be Claded With SS 304 In Gmp Model.
Panel Provided With Following Facilities In 5000 Liters & Bigger Model Of Ribbon Blenders. In Small Model Of Ribbon Blender - Only D.O.L. Starter Provided For On-Off Operation Of The Motor.
Three Phase Indication Facility.
D.O.L. Starter For On-Off Operation Of Motor.
Emergency Stop Provided In Panel.
Digital Timer For Batch Time Setting.
Limit Switch Provided At Top Cover For Safety Purpose.
Inching Push Button With Selector Switch For Inching Operation During Discharge Of Material.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Capacity | As Per Requirement |
Usage/Application | Industrial |
Material | As Per Requirement |
Shape | As Per Requirement |
Automation Grade | Semi-Automatic |
Powder Mixing | As Per Requirement |
Phase | As Per Requirement |
Alignment | As Per Requirement |
Max. Mixing Mass | As Per Requirement |
Speed | 1440 |
Voltage | As Per Requirement |
Power | As Per Requirement |
Drive Motor Power | As Per Requirement |
Weight | As Per Requirement |
Display | As Per Requirement |
Finishing | As Per Requirement |
Size | As Per Requirement |
Powder Intake | As Per Requirement |
Features | As Per Requirement |
I Deal In | New Only |
Country of Origin | Made in India |
Food Powder Mixing Machine
Blender Machine The Powder Moves From Centre To The End Of Container And End Of Container To The Centre Of Container. Hence Requirement Of Total Mixing Time Is Very Less And The Rpm Required Are Also Very Less.
The Dry Material Gets Sufficient Continuous Movement Due To The Shape & Movement Of Ribbon & Shape Of The Container. Which Moves Material For Good Quality Of Blending.
The Unit Is Consist Of One Electrical Motor, One Worm Reduction Gear, Belt Drive Between Motor And Gear, Couple Drive Between Gear To ( Ribbon ) Mixing Stirrer. Container Having Four Nos. Of Legs With Discharge Valve & Top Cover. Both End Of Mixing Shaft Is Sealed With Bush & Gland Housing & Safety Guards Are Provided On All Moving Parts.
Special Features Of The Ribbon Blender :
The Shape Of Container And Mixing Stirrer Gives Sufficient Continuous Movement To The Powder / Granules, Result In Good Quality.
All Contact Parts Of The Ribbon Blender Are Made Of SS 304/SS 316 Or SS 316 L Quality Material.
Jacket Heating / Cooling Facility Provided As Optional.
Maximum Care Has Been Taken To Ensure Safe Operation Of The Unit.
Inching Facility For Stirrer For Discharge Of Material.
Full Cover On Top Side Of The Container.
Discharge Height Must Be Adjusted, If Confirm With Order.
Operating Panel Provided For Safe Operation Of Ribbon Blender.
Centrally Located Material Discharge Valve. ( Butter Fly / Sliding Valve )
Dust Proof Top Cover With Window Provided.
General Structure Completely Made Out Of Mild Steel & Painted In Standard Model & The Same Is Claded With SS 304 In Gmp Model.
Safety Guards & Covers Made Out Of SS 304 In Gmp Model & Made Out Of Mild Steel In Standard Model.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Machine Size | As Per Requirement |
Automation Grade | As Per Requirement |
Blower | As Per Requirement |
Capacity | As Per Requirement |
Max production rate | As Per Requirement |
Dimension | As Per Requirement |
Voltage | As Per Requirement |
Weight | As Per Requirement |
Country of Origin | Made in India |
Is It Portable | Portable |
Type of Machine | Hammer Mill |
Surface Finish | As Per Requirement |
Power Consumption | As Per Requirement |
Motor Power | As Per Requirement |
Material of Construction(Contact) | As Per Requirement |
Feature | As Per Requirement |
Usage/Application | Industrial |
Electricity Connection | Three Phase |
I Deal In | New Only |
Operation Mode | Semi-Automatic |
Frequency | As Per Requirement |
Dry Mixer Powder Mixing Machine
Blender Machine The Powder Moves From Centre To The End Of Container And End Of Container To The Centre Of Container. Hence Requirement Of Total Mixing Time Is Very Less And The Rpm Required Are Also Very Less.Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Weight | As Per Requirement |
Power | As Per Requirement |
Phase | As Per Requirement |
Drive Motor Power | As Per Requirement |
Speed | 1440 |
Material | As Per Requirement |
Voltage | As Per Requirement |
Powder Intake | As Per Requirement |
Usage/Application | Industrial |
Powder Mixing | As Per Requirement |
Finishing | As Per Requirement |
I Deal In | New Only |
Alignment | As Per Requirement |
Automation Grade | Semi-Automatic |
Country of Origin | Made in India |
Shape | As Per Requirement |
Features | As Per Requirement |
Design Type | Standard |
Max. Mixing Mass | As Per Requirement |
Display | As Per Requirement |
Size | As Per Requirement |
Capacity | As Per Requirement |
Powder Mixing Machine
Blender Machine The Powder Moves From Centre To The End Of Container And End Of Container To The Centre Of Container. Hence Requirement Of Total Mixing Time Is Very Less And The Rpm Required Are Also Very Less.
The Dry Material Gets Sufficient Continuous Movement Due To The Shape & Movement Of Ribbon & Shape Of The Container. Which Moves Material For Good Quality Of Blending.
The Unit Is Consist Of One Electrical Motor, One Worm Reduction Gear, Belt Drive Between Motor And Gear, Couple Drive Between Gear To ( Ribbon ) Mixing Stirrer. Container Having Four Nos. Of Legs With Discharge Valve & Top Cover. Both End Of Mixing Shaft Is Sealed With Bush & Gland Housing & Safety Guards Are Provided On All Moving Parts.
Special Features Of The Ribbon Blender :
The Shape Of Container And Mixing Stirrer Gives Sufficient Continuous Movement To The Powder / Granules, Result In Good Quality.
All Contact Parts Of The Ribbon Blender Are Made Of SS 304/SS 316 Or SS 316 L Quality Material.
Jacket Heating / Cooling Facility Provided As Optional.
Maximum Care Has Been Taken To Ensure Safe Operation Of The Unit.
Inching Facility For Stirrer For Discharge Of Material.
Full Cover On Top Side Of The Container.
Discharge Height Must Be Adjusted, If Confirm With Order.
Operating Panel Provided For Safe Operation Of Ribbon Blender.
Centrally Located Material Discharge Valve. ( Butter Fly / Sliding Valve )
Dust Proof Top Cover With Window Provided.
General Structure Completely Made Out Of Mild Steel & Painted In Standard Model & The Same Is Claded With SS 304 In Gmp Model.
Safety Guards & Covers Made Out Of SS 304 In Gmp Model & Made Out Of Mild Steel In Standard Model.
Legs Made Out Of M.S & Painted In Standard Model & Same Will Be Claded With SS 304 In Gmp Model.
Panel Provided With Following Facilities In 5000 Liters & Bigger Model Of Ribbon Blenders. In Small Model Of Ribbon Blender - Only D.O.L. Starter Provided For On-Off Operation Of The Motor.
Three Phase Indication Facility.
D.O.L. Starter For On-Off Operation Of Motor.
Emergency Stop Provided In Panel.
Digital Timer For Batch Time Setting.
Limit Switch Provided At Top Cover For Safety Purpose.
Inching Push Button With Selector Switch For Inching Operation During Discharge Of Material.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Capacity | As Per Requirement |
Usage/Application | Industrial |
Material | As Per Requirement |
Shape | As Per Requirement |
Powder Mixing | As Per Requirement |
Design Type | Customized |
Phase | As Per Requirement |
Automation Grade | Semi-Automatic |
Alignment | As Per Requirement |
Max. Mixing Mass | As Per Requirement |
Speed | 1440 |
Voltage | As Per Requirement |
Power | As Per Requirement |
Drive Motor Power | As Per Requirement |
Weight | As Per Requirement |
Display | As Per Requirement |
Finishing | As Per Requirement |
Size | As Per Requirement |
Powder Intake | As Per Requirement |
Features | As Per Requirement |
I Deal In | Second Hand Only |
Gross Volume LTRS | As Per Requirement |
Working Volume LTRS | As Per Requirement |
Main Gear Box | As Per Requirement |
Gross Volume | As Per Requirement |
Working Volume | As Per Requirement |
Country of Origin | Made in India |
High Capacity Ribbon Blender
Blender Machine The Powder Moves From Centre To The End Of Container And End Of Container To The Centre Of Container. Hence Requirement Of Total Mixing Time Is Very Less And The Rpm Required Are Also Very Less.
The Dry Material Gets Sufficient Continuous Movement Due To The Shape & Movement Of Ribbon & Shape Of The Container. Which Moves Material For Good Quality Of Blending.
The Unit Is Consist Of One Electrical Motor, One Worm Reduction Gear, Belt Drive Between Motor And Gear, Couple Drive Between Gear To ( Ribbon ) Mixing Stirrer. Container Having Four Nos. Of Legs With Discharge Valve & Top Cover. Both End Of Mixing Shaft Is Sealed With Bush & Gland Housing & Safety Guards Are Provided On All Moving Parts.
Special Features Of The Ribbon Blender :
The Shape Of Container And Mixing Stirrer Gives Sufficient Continuous Movement To The Powder / Granules, Result In Good Quality.
All Contact Parts Of The Ribbon Blender Are Made Of SS 304/SS 316 Or SS 316 L Quality Material.
Jacket Heating / Cooling Facility Provided As Optional.
Maximum Care Has Been Taken To Ensure Safe Operation Of The Unit.
Inching Facility For Stirrer For Discharge Of Material.
Full Cover On Top Side Of The Container.
Discharge Height Must Be Adjusted, If Confirm With Order.
Operating Panel Provided For Safe Operation Of Ribbon Blender.
Centrally Located Material Discharge Valve. ( Butter Fly / Sliding Valve )
Dust Proof Top Cover With Window Provided.
General Structure Completely Made Out Of Mild Steel & Painted In Standard Model & The Same Is Claded With SS 304 In Gmp Model.
Safety Guards & Covers Made Out Of SS 304 In Gmp Model & Made Out Of Mild Steel In Standard Model.
Legs Made Out Of M.S & Painted In Standard Model & Same Will Be Claded With SS 304 In Gmp Model.
Panel Provided With Following Facilities In 5000 Liters & Bigger Model Of Ribbon Blenders. In Small Model Of Ribbon Blender - Only D.O.L. Starter Provided For On-Off Operation Of The Motor.
Three Phase Indication Facility.
D.O.L. Starter For On-Off Operation Of Motor.
Emergency Stop Provided In Panel.
Digital Timer For Batch Time Setting.
Limit Switch Provided At Top Cover For Safety Purpose.
Inching Push Button With Selector Switch For Inching Operation During Discharge Of Material.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Capacity | As Per Requirement |
Usage/Application | Industrial |
Material | As Per Requirement |
Shape | As Per Requirement |
Powder Mixing | As Per Requirement |
Phase | As Per Requirement |
Automation Grade | Semi-Automatic |
Alignment | As Per Requirement |
Max. Mixing Mass | As Per Requirement |
Speed | 1440 |
Voltage | As Per Requirement |
Power | As Per Requirement |
Drive Motor Power | As Per Requirement |
Weight | As Per Requirement |
Display | As Per Requirement |
Finishing | As Per Requirement |
Size | As Per Requirement |
Powder Intake | As Per Requirement |
Features | As Per Requirement |
I Deal In | New Only |
Gross Volume LTRS | As Per Requirement |
Working Volume LTRS | As Per Requirement |
Main Gear Box | As Per Requirement |
Gross Volume | As Per Requirement |
Working Volume | As Per Requirement |
Country of Origin | Made in India |
Powder Shaped Ribbon Blender
Blender Machine The Powder Moves From Centre To The End Of Container And End Of Container To The Centre Of Container. Hence Requirement Of Total Mixing Time Is Very Less And The Rpm Required Are Also Very Less.
The Dry Material Gets Sufficient Continuous Movement Due To The Shape & Movement Of Ribbon & Shape Of The Container. Which Moves Material For Good Quality Of Blending.
The Unit Is Consist Of One Electrical Motor, One Worm Reduction Gear, Belt Drive Between Motor And Gear, Couple Drive Between Gear To ( Ribbon ) Mixing Stirrer. Container Having Four Nos. Of Legs With Discharge Valve & Top Cover. Both End Of Mixing Shaft Is Sealed With Bush & Gland Housing & Safety Guards Are Provided On All Moving Parts.
Special Features Of The Ribbon Blender :
The Shape Of Container And Mixing Stirrer Gives Sufficient Continuous Movement To The Powder / Granules, Result In Good Quality.
All Contact Parts Of The Ribbon Blender Are Made Of SS 304/SS 316 Or SS 316 L Quality Material.
Jacket Heating / Cooling Facility Provided As Optional.
Maximum Care Has Been Taken To Ensure Safe Operation Of The Unit.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Capacity | 1000-10000L |
Material | ALL |
Usage/Application | Industrial |
Automation Grade | Semi-Automatic |
Gross Volume LTRS | As Per Requirement |
Working Volume LTRS | As Per Requirement |
Main Gear Box | As Per Requirement |
Gross Volume | As Per Requirement |
Working Volume | As Per Requirement |
Country of Origin | Made in India |
Ribbon Blender Mixer Pharma Chemical Mixer
Blender Machine The Powder Moves From Centre To The End Of Container And End Of Container To The Centre Of Container. Hence Requirement Of Total Mixing Time Is Very Less And The Rpm Required Are Also Very Less.
The Dry Material Gets Sufficient Continuous Movement Due To The Shape & Movement Of Ribbon & Shape Of The Container. Which Moves Material For Good Quality Of Blending.
The Unit Is Consist Of One Electrical Motor, One Worm Reduction Gear, Belt Drive Between Motor And Gear, Couple Drive Between Gear To ( Ribbon ) Mixing Stirrer. Container Having Four Nos. Of Legs With Discharge Valve & Top Cover. Both End Of Mixing Shaft Is Sealed With Bush & Gland Housing & Safety Guards Are Provided On All Moving Parts.
Special Features Of The Ribbon Blender :
The Shape Of Container And Mixing Stirrer Gives Sufficient Continuous Movement To The Powder / Granules, Result In Good Quality.
All Contact Parts Of The Ribbon Blender Are Made Of SS 304/SS 316 Or SS 316 L Quality Material.
Jacket Heating / Cooling Facility Provided As Optional.
Maximum Care Has Been Taken To Ensure Safe Operation Of The Unit.
Inching Facility For Stirrer For Discharge Of Material.
Full Cover On Top Side Of The Container.
Discharge Height Must Be Adjusted, If Confirm With Order.
Operating Panel Provided For Safe Operation Of Ribbon Blender.
Centrally Located Material Discharge Valve. ( Butter Fly / Sliding Valve )
Dust Proof Top Cover With Window Provided.
General Structure Completely Made Out Of Mild Steel & Painted In Standard Model & The Same Is Claded With SS 304 In Gmp Model.
Safety Guards & Covers Made Out Of SS 304 In Gmp Model & Made Out Of Mild Steel In Standard Model.
Legs Made Out Of M.S & Painted In Standard Model & Same Will Be Claded With SS 304 In Gmp Model.
Panel Provided With Following Facilities In 5000 Liters & Bigger Model Of Ribbon Blenders. In Small Model Of Ribbon Blender - Only D.O.L. Starter Provided For On-Off Operation Of The Motor.
Three Phase Indication Facility.
D.O.L. Starter For On-Off Operation Of Motor.
Emergency Stop Provided In Panel.
Digital Timer For Batch Time Setting.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Capacity | 150 pr hr |
Usage/Application | Industrial |
Material | SS |
Design Type | Standard |
Phase | Single |
Automation Grade | Semi-Automatic |
Frequency | 50-60 Hz |
Country of Origin | Made in India |
Mass Mixing Machine
Basically Mixing A Assembly Wherein The Mixing Stirrer Is In Horizontal Position In The Container & Have A Single Speed, Simple Rotation. The Stirrer Rotates Around It Self At A Very Slow Speed Inside The Bowl And Thereby Achieving Intimate Mixing Of Dry Or Wet Materials Of Tablet Granulation, Powder, Chemicals, Food & Confectionaries Materials. Because Of A Special Design Feature Of Machine & Stirrer, The Mass Mixer Can Be Mix The Sticky Materials & Also Uniformly And Intimately Mix The Materials Which Are To Be Difficult To Mix.
Special Features :
Range Of Mass Mixers Models To Suit Working Volume 50,100 & 200 Kgs. At Bulk Density Of 0.50 Gms/Cc.
All Contact Parts Of Mass Mixers Are Made Out Of S.S.304 Quality Material.(S.S 316 Provided On Demand On Extra Cost)
Compact Design Requires Comparatively Smaller Floor Space.
Single Stirrer With Single Speed For Dry & Wet Mixing.
All Non Contact Parts In The Mass Mixers (General Structure) Are Made Out Of Mild Steel And Claded With S.S 304 Or Chrome Plated Or Made Out Of S.S 304 In Gmp Model. Contact Parts Are Polished To The Mirror Finished And Non Contact Parts Are Polished To The Matt Finished In Gmp Model. All Safety Guards & Covers Made Out Of Ss304 Material In Gmp Model & Made Out Of Mild Steel & Painted In Standard Model. All Moving Parts Are Enclosed With Safety Guards.
All Moving Parts Are Enclosed With Safety Guards.
Thrust Bearings Are Provided To Carry Out Rigid Thrust Load.
Easy For Cleaning & Operating.
Simply Designed S.S 304 Dust Cover Provided With One Port For Material Charging & Inspection.
Interlocking System With Top Dust Cover, To Avoid Accident, During Process. The Container Tilting System Provided For Easy Unloading Of Material And Easy Cleaning.
Specially Design All Moving Parts Provided With Provision Of Easy Lubrication.
Shell :
Consisting Of 'U' Trough Of Suitable Dimensions. Construction Of S.S. And Side Plates Duly M.S. Stiffened From Outside And From Inside With S.S.
Mixing Mechanism :
Paddle Type Blades Welded To The Main Shaft Provide For Efficient Mixing Of Thick Heavy Material. Ptfe Gland Mechanism Provided At Shaft Ends Prevents Ingress Of External Powder Into The Trough And Prevents Leakage.
Charging :
From The Top Charging Can Be Done Through A Hinge Able Lid, Hopper Or Nozzle Can Be Provided For Additional Spraying Of Additives.
Discharge :
By Bottom Discharge Slide Iris Or Butterfly Valve Of Suitable Diameter, For Regulated Discharge.
Drive :
Consisting Of Suitable H.P. Tefc 3 Phase Ac 415v / 50 Cycles Motor Coupled To Suitable Worm Gear, With Driving Shafts Mounted On Suitable Plummer Block.
Mounting :
Mounted On Suitable Ismc Section Stand, With Protective Covers For Belts And Couplings.
Moc :
All Contact Parts In S.S. Constructions. Complete Unit With S.S. Cover And All Surfaces Polished To Mirror Dull Finish. Ms Parts Dull Painted To Smooth Finish.
Options Available :
The Control Panel Is Mounted On Platform And Is Provided With
Unit With Flp
Unit In S.S. 316
Gmp Model With M.S. Parts Cladded With S.S.
Application :
Mass Mixers Are Ideal For Mixing Of Pharmaceutical Powders, Chemicals, Food And Confectioneries Etc.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Capacity | 100 per mint |
Material | SS |
Automation Grade | Semi-Automatic |
Phase | Single |
Voltage | 220 V |
Power | Electric |
Frequency | 50-60 Hz |
Brand | Shree Balaji Protech |
Country of Origin | Made in India |
Octagonal Blender Is An Efficient And Versatile Blending Machine For Mixing And Lubrication Process Of Dry Granules Homogeneously. Two Third Of The Volume Of The Octagonal Blender Is Filled To Ensure Proper Mixing. The Octagonal Blender Gives Best Result For Granules Due To Very Slow Speed And Octagon Shape Of Container. It Can Be Used For Pharmaceutical, Food, Chemical And Cosmetic Products Etc.
In Octagonal Blender The Granules Comes From All Sides Due To The Octagonal Shape Of The Product Container, Hence Requirement Of Rpm Is Less. Suitable Mainly For Crystalline & Granular Type Material. This Type Of Material Gets Sufficient Continuous Movement Due To Their Shape If Container Have Only Slow Movement And Will Results In Good Quality Of Blending / Lubrication Of Granules.
Special Features Of Octagonal Blender :
Octagonal Blender Is Suitable For Dry Mixing Of Products In Granule Form.
Easy For Loading And Unloading Of Material.
Easy For Cleaning.
All Contact Parts Of The Octagonal Blender Are Made Out Of SS 304 / SS 316 Or Quality Material, As Per Customer Requirement.
The Octagonal Shape & Slow Speed Of Rotating Gives Sufficient Continuous Movement To The Granules, Result In Good Quality.
Simple Design Octagonal Blender Requires Minimum Maintenance.
General Structure & Safety Guards Made Out Of Mild Steel & Coloured In Standard Model And Made Out Of SS 304 & Polished To The Matt Finish In Gmp Model.
Maximum Care Has Been Taken To Ensure Safe Operation Of The Unit.
Manual Rotating Facility With Hand Wheel For Inching.
Bigger Size Batch At Low Power Consumption.
Option :
( Will Be Provided On Extra Cost On Your Demand )
Contact Parts Of The Octagonal Blender Made Out Of Ss316 Instead Of Ss304.
Flame Proof Drive Motor Along With Flame Proof Starter.
Vacuum Loading Facility For Material Charging.
Cylindrical Container With Cone For Material Charging.
Additional Information:
Product Details:
Automation Grade | Semi-Automatic |
Production Capacity | upto 50 kg/hr |
Usage/Application | Mixing |
Shape | u shape |
Design Type | Customized |